Details

Session Description:

Lead-Safe Weatherization & EPA, WA State RRP, HUD Lead Safe Work Practices 

16 hours

Cost:  $550 (includes $25.00 Washington State Lead Certification Fee)

CEUs:  7

Instructor:  Jon Martin


This training is designed for those who have had no lead training. Successful completion of the course will lead to EPA Certified Renovator, DOE Lead-Safe Weatherization and State of Washington Containment and Clean-up certifications. HUD requirements are also covered during this two-day class. This class is approved for certification for the Renovator, Repair and Painting Program pursuant to Section 402 of the Toxic Substance Control Act (TSCA)(15U.S.C. 2682) and WAC Code 365-230 (Washington State).

Module 1 - Objective for Lead Safe Weatherization Training
Module 2 - Objectives for Lead Safe Work Practices Training
Module 3 - Objectives for Lead Containment and Cleanup Training
Module 4 - Objectives for Lead Safe Worker Protection

Module 1
Objectives for Lead Safe Weatherization and Remodeling Training

1) To understand why it is important to minimize and control the generation of lead dust when doing weatherization work and remodeling work.

2) To understand the Department of Energy, EPA and State of Washington expectations for, and boundaries of, working with lead based paint specific to weatherization and remodeling and repair work.

3) To gain a working knowledge of the regulations governing worker protection from hazards created by disturbance of lead based painted surfaces.

4) To gain a working knowledge of tools, techniques and resources required to achieve the objectives listed above.

Upon completion of this module, participants will be able to perform Weatherization and remodeling and repair work in a manner that minimizes creation and dispersal of lead contaminated dust and protects residents, especially children, from possible lead exposure.

This module will show participants how to perform their work in a manner that creates the least amount of dust possible, and how to contain and clean up dust that they do create so that it does not spread throughout the house or to neighboring properties.

Module 2
Objectives for Lead Safe Work Practices Training

1) To understand why it is important to minimize and control the generation of lead dust when doing Renovation, Remodeling, Rehabilitation and Maintenance work.

2) To gain a working knowledge of tools and techniques required to achieve those objectives.

3) To understand the U.S. Department of Housing and Urban Development , Department of Energy, Environmental Protection Agency, and Washington State Department of Commerce rules and regulations regarding the disturbance of lead-based painted surfaces during renovation, remodeling, and rehabilitation in target housing.

4) To gain a working knowledge of the regulations governing worker protection from hazards created by the disturbance of lead based painted surfaces.

Upon completion of this module, participants will be able to perform renovation, remodeling, and rehabilitation in a manner that minimizes creation and dispersal of lead contaminated dust and protects residents, especially children, from possible lead exposure.

This module will show contractors how to perform their work in a manner that creates the least amount of dust possible, and how to contain and clean up dust that they do create so that it does not spread throughout the house or to neighboring properties.

The techniques discussed in this module apply to work performed by a variety of contractors and employees, including plumbers, electricians, residential renovators, remodelers, and painters.

Module 3
Objectives for Lead Containment and Cleanup Training

1) To gain experience in the use of tools needed to minimize the generation of lead dust when doing work that disturbs lead based painted surfaces.

2) To learn and practice the techniques required to contain dust and debris inside a work area where lead based painted surfaces are being disturbed.

3) To become familiar with the tools and supplies necessary as well as practice the methods used to cleanup an area where hazardous amounts of lead contaminating dust have been identified or where work has been done that disturbed a lead based painted surface.

4) To become familiar with the use, bag replacement, and proper maintenance of a high efficiency particulate air (HEPA) vacuum.

Upon completion of this module, participants will be able to perform renovation, remodeling, rehabilitation and Weatherization in a manner that minimizes creation and dispersal of lead contaminated dust and protects residents, especially children, from possible lead exposure.

This module will show participants how to perform their work in a manner that creates the least amount of dust possible, and how to contain and clean up dust that they do create so that it does not spread throughout the house or to neighboring properties.

Module 4
Objectives for Lead Safe Worker Protection

1) To gain a thorough understanding of the Occupational Health and Safety Administration (insert Washington Industrial Safety and Health Act for Washington State trainings) standards and requirements for protecting workers from harmful levels of lead in construction.

2) To gain familiarity with the use of equipment used to monitor and protect workers from exposure to harmful levels of lead in construction.

3) To understand what is needed to implement a worker protection program that complies with the Occupational Health and Safety Administration (insert Washington Industrial Safety and Health Act for Washington State trainings).

Upon completion of this module, participants will have been provided with the information necessary to able to implement a Lead Safe Worker program that complies with the Occupational Health and Safety Administration standards and requirements to prevent lead exposure in construction.

If you would like to attend this class please enter your email address and select the registration option below. After that please press "Continue" to complete your Order. All fields marked with a red asterisk (*) are required.
Your Information
Not Available for Booking
This Event cannot be booked, as it has been deactivated by the event organizer.
Date & Time and Location

When

Wednesday, 11 Jul 2012 8:30 AM - Thursday, 12 Jul 2012 5:00 PM - (GMT-08:00) Pacific Time (US & Canada)

Schedule

11 Jul 2012 8:30 AM- 5:00 PM
CACLMT

12 Jul 2012 8:30 AM- 5:00 PM
CACLMT

Where

CACLMT
3741 Griffin Ln. SE
Olympia,Washington
98501

Class Contact

Robyn Kauppila

robyn_kauppila@oppco.org

360-734-5121 x 114

Our Refund Policy:

This policy pertains to all workshops / trainings conducted by the NWTI and the Building Performance Center, except as noted below for the BPI Certification Exams.


1. Cancellations and Refunds will be granted according to the following schedule: For General Public / Non-Associated and Wx Agency-Associated Contractor Attendee Types, as well as NWTI participants:


a. If notice of cancellation is received at least three (3) business days prior to the start date of the course, we will refund 100% of the course fee, less a $10.00 Administrative Processing fee. Administrative Processing fee will be waived if participant reschedules into a different training. An Administrative Processing fee of $10.00 will be applied if participant is registered in one workshop or training and transfers to a different workshop or training MORE THAN ONCE.


b. There are no refunds on or after three (3) business days prior to the start date of the workshop/training.


For Wx Agency Staff Attendee Types:


a. If notice of cancellation is received at least three (3) business days in advance a $10.00 Administrative Processing fee will be billed to your Agency. Administrative Processing fee will be waived if participant reschedules into a different training.


b. On or after three (3) business days prior to the start date of the workshop/training, any cancellations made within this time frame will incur a $25.00 Cancellation fee to be billed to your Agency.


c. A "no-show" fee of $25.00 will be applied if registrant does not contact us regarding cancellation and does not show up to their scheduled workshop/training.


d. An Administrative Processing fee of $10.00 will be applied if participant is registered in one workshop/training and transfers to a different workshop/training MORE THAN ONCE.


2. Building Performance Center reserves the right to cancel any training at any time. A 100% refund will be made when Building Performance Center cancels a workshop/training.


3. Credit card refunds will be processed within three business days of cancellation.


4. Please contact Robyn Kauppila at (360) 734-5121 x. 114 or robyn_kauppila@oppco.org to send notice of cancellation.


BPI Certification Exam Refund Policy: In the event of cancellation for BPI Exams the following cancellation fees will be deducted from any refund:


** Fifteen (15) calendar days or more prior to exam date:  100% of course fee less a $10.00 Administrative Processing fee

** Fourteen (14) calendar days or more prior to date: 25% of course fees

** Thirteen (13) calendar days to 72 hours prior to date: 50% of course fees

** Less than 72 hours prior to exam date: 75% of course fees

*** Please note: Cancellation circumstances that are beyond the control of the candidate will be evaluated on a case-by-case basis. 

Acteva's Refund Policy:
Acteva provides refunds or issues credit as directed by the organization hosting or sponsoring this event, per their stated Refund Policy (above). Please contact the sponsoring organization for further details. For further questions or clarifications you may contact refunds@acteva.com.